10 Tips on Using Fuel Management Software for Maritime Operations


Marine fuel management software measures how much fuel each vessel burns, when and why, so operators can cut consumption and emissions with evidence rather than estimates. These 10 tips cover how to get real fuel efficiency gains from it on crew transfer vessels, SOVs, tugs and workboats.

AST Reygar's Fuel Management Software 10 Practical Tips

Fuel remains one of the largest single operating expenses for commercial vessel operators. For companies managing Crew Transfer Vessels (CTVs), Service Operation Vessels (SOVs), tugs, and workboats, monitoring these costs effectively requires specialised technology. Standard shore-based logistics tools cannot handle the dynamic environmental variables of maritime operations, such as headseas, tidal currents, and hull fouling.

Implementing a dedicated maritime fuel management software framework gives shore teams and crews the visibility needed to control costs. Here are 10 fuel management software tips to help you maximise the value of your asset telemetry and software tracking.

1. Move Beyond Manual Noon Reports

Legacy noon reports are prone to human error, inconsistencies, and lag times. To achieve genuine oversight, ensure your fuel management software integrates directly with live onboard hardware, such as main engine ECUs and high-precision fuel flow meters. Automatically pulling sensor-derived streaming data provides an accurate, unalterable baseline for your entire fleet.

2. Monitor Fuel Consumption by Operational Phase

A vessel burns fuel differently depending on its immediate task. Your reporting shouldn't treat a whole shift as a single block of time. Configure your software to break down consumption patterns across specific operational phases:

  • In Transit: High-speed travel to and from sites.
  • On-Site / Pushing On: Maintaining position against offshore wind turbine towers.
  • Idling: Low-load engine periods.

3. Provide In-Bridge Readouts for the Crew

The day-to-day choices that directly lower fuel burn are made by the skipper and crew on deck, not the office. Deploying an in-bridge display, such as the BareFLEET Fuel UI tablet app, gives skippers real-time feedback on current consumption against pre-defined vessel targets. Immediate visual feedback encourages crew buy-in and immediate adjustments.

4. Identify and Maintain the "Green Zone"

Every hull type has an optimal cruising speed where fuel efficiency peaks. Advanced fuel management software plots fuel efficiency metrics—specifically litres per nautical mile versus actual boat speed. Identifying this optimal "green zone" allows crews to adjust transit speeds slightly, frequently reducing overall fuel bills by up to 15% to 20% without impacting arrival windows.

5. Isolate and Targeted Excessive Idling

Idling quietly drains fuel reserves, accelerates carbon outputs, and unnecessarily builds engine hours. Use your software dashboards to isolate exactly how many litres are consumed while vessels sit idle in harbour or on-site. Highlighting these trends lets shore teams establish firm operational guidelines regarding engine shut-downs during prolonged waiting periods.

6. Use Fuel Anomalies to Diagnose Mechanical Issues

Sudden or gradual drops in fuel efficiency often serve as an early warning sign for structural or mechanical defects. If your software shows a vessel is burning more litres per nautical mile than its historical baseline at a set speed, it can indicate:

  • Severe hull fouling or marine growth.
  • Propeller damage or deformation.
  • Underlying engine or fuel injector abnormalities.

7. Build Collaborative Performance Leaderboards

Transparency fosters better operational habits. Use analytics tools within your fuel management software to trend fuel performance across different crews and sister vessels over time. Creating fleet leaderboards allows you to identify top-performing crews, isolate inefficient operational habits, and replicate fuel-saving best practices across your organization.

8. Automate Your Carbon Compliance Reporting

With strict environmental mandates from global maritime regulators and offshore wind developers, manual emissions tracking is no longer sufficient. Modern maritime fuel management software automatically converts high-precision fuel data into verified CO2, NOx, and SOx emissions metrics. This reduces administrative tasks for the crew and ensures your business can provide auditable sustainability data to clients.

9. Integrate Telemetry with Planned Maintenance Systems (PMS)

Fuel inefficiencies and mechanical strain go hand in hand. By linking your live fuel management software's telemetry capabailites and engine alarm outputs directly to third-party maintenance systems (such as Crewsmart or Marad), you can establish automatic triggers. An unusual spike in fuel consumption can instantly log a maintenance check, moving your fleet from reactive fixes to predictive maintenance.

10. Pair Fuel Telemetry with Digital Logbooks

To understand the exact cost of each marine contract, your data systems must communicate. AST Reygar’s BareFLEET resolves this through a premium integration with Helm CONNECT’s fleet management suite.

This configuration feeds live fuel burn and emission metrics straight into your digital logbooks. The combined software framework automatically breaks down exact fuel usage for every single job or client activity logged, ensuring transparent, granular billing.

Evaluating Your Fuel Monitoring Software Strategy

Fuel Management TrackingLegacy Logging MethodsAdvanced Telemetry Software
Data FrequencyOnce per shift / DayContinuous, live streaming
Data SourceVisual gauge estimatesDirect ECU and flow meter reads
Operational AnalysisFlat total usage figuresSeparated by transit, idling, and site work
Crew InvolvementRetrospective log entriesLive, in-bridge target guidance
Emissions TrackingApproximate mathematical estimatesHigh-precision, auditable compliance logs

Optimise Your Maritime Assets

Relying on fragmented spreadsheets or generic trackers introduces unnecessary financial and operational risk to your business. Implementing a dedicated maritime fuel management software solution like BareFLEET provides the transparency, objective analytics, and real-time control required to run a cleaner, safer, and more profitable fleet.

Click here to contact the AST Reygar team and schedule a bespoke platform demo or ask any questions about fuel management software.

Ask an expert

Have a question? Ask our team

Whether you are looking at fuel monitoring, maintenance, vessel performance or remote asset monitoring, our team will give you a straight answer. We usually reply within one working day.

Ask an Expert (blog posts)

We will only use your details to answer your question. See our privacy policy.

Subscribe to our newsletter:

Sign up to our newsletter
GDPR Consent

Contact us:

T: +44 (0) 1453 368 008
E: info@ast-reygar.com

Follow us on social media:

© 2025 AST Reygar Registered in England | Company Number: 8028047 England  | VAT Number: GB 224 0384 41
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram