A remote generator monitoring system lets you check a diesel genset's fuel, load and alarms from anywhere, without sending an engineer to site. Portable and static generator sets in offshore or remote land-based locations are expensive to maintain, and remote monitoring is how operators keep them running without the travel.
A generator monitoring system connects to a genset’s controller and sends its operating data to a web dashboard, so operators can see how each generator is running without visiting the site. A typical system tracks:
Remote generator monitoring adds control on top of this: starting and stopping the genset, resetting faults and changing modes from the dashboard.
Typically conditions can be harsh, very often expensive to send maintenance engineers and where there can be little or no terrestrial land-based or cellular-based communications to remotely monitor and manage your asset.
A new non-intrusive generator telematics and SCADA type solution called AT Gensets using global satellite technology addresses all these challenges. With the massive expansion of low latency satellite networks, coupled with greatly reduced costs for low bandwidth mobile satellite data, has now significantly improved the economic viability of remotely managing and controlling generators worldwide using satellite technology for the marine, environmental and industrial sectors.

Global: remotely using SCADA satellite technology. AT Gensets is a self-contained and independent global solution which communicates with gensets with MODBUS Controllers, worldwide.
Monitors: users can monitor a wide variety of operational, alarms, faults and fuel usage parameters to monitor the efficiency and health of the genset via an internet connection.
Controls: users can remotely start and stop under controlled conditions, reset, change mode, configure thresholds, download raw data and schedule reports.
Alerts: when an event is detected the user can choose to receive a notification by email.
User interface: users are supplied with an intuitive and simple to use AT Gensets web based Graphic User Interface (GUI) to enable them to manage, monitor, report and control the gensets.
Most importantly, marine assets are now never out of sight. Real time information is managed by accessible software to provide your organisation with increased levels of control and the ability to significantly reduce operating costs.
Controls: users can remotely start and stop under controlled conditions, reset, change mode, configure thresholds, download raw data and schedule reports.
Alerts: when an event is detected the user can choose to receive a notification by e-mail.
Fuel status: visual, colour-coded overlay of genset fuel status.
Wide range of engine parameters which are constantly monitored.
Genset access door sensor recording and alerting.
Monitors: iRAMS users can monitor a wide variety of operational, alarms, faults and fuel usage parameters to monitor the efficiency and health of the genset via a PC/smartphone with an internet connection.
Alerts: when an event is detected, the user can choose to receive a notification by e-mail.
User interface: users are supplied with an intuitive and simple to use iRAMS web-based Graphic User Interface (GUI) to enable them to manage, monitor, report and control the genset.
Mapping: aid in scheduling and refuelling logistics.
Fuel status: visual, colour-coded overlay of genset fuel status.
A generator monitoring system collects data from a generator’s controller, such as fuel, load, alarms and running hours, and makes it available remotely through a web dashboard, with alerts when something needs attention.
Yes. ASTSPARC uses satellite communications, so it works in remote and offshore locations with no mobile coverage, and it can switch automatically between GSM and satellite where both are available.
No. ASTSPARC is a non-intrusive system that communicates with gensets through their existing MODBUS controllers.
Visit AST Reygar to learn about how they can help you reduce emissions and save money. BareFLEET is AST Reygar’s award-winning remote monitoring and asset management system for maritime vessels.
We are pioneers in developing cutting-edge remote monitoring and asset management systems specifically designed for marine applications. Our award-winning solutions empower you with accurate, real-time insights, ensuring optimal performance, safety, and efficiency for your assets as they navigate the high seas.
Ask an expert
Whether you are looking at fuel monitoring, maintenance, vessel performance or remote asset monitoring, our team will give you a straight answer. We usually reply within one working day.
