Remote Generator Monitoring for Gensets with ASTSPARC


A remote generator monitoring system lets you check a diesel genset's fuel, load and alarms from anywhere, without sending an engineer to site. Portable and static generator sets in offshore or remote land-based locations are expensive to maintain, and remote monitoring is how operators keep them running without the travel.

What a generator monitoring system does

A generator monitoring system connects to a genset’s controller and sends its operating data to a web dashboard, so operators can see how each generator is running without visiting the site. A typical system tracks:

  • Fuel levels and consumption, to plan refuelling and spot losses.
  • Load and output, to see whether a generator is sized and run efficiently.
  • Engine parameters such as temperatures, pressures and running hours, to plan servicing.
  • Alarms and faults, with alerts sent as soon as something goes wrong.
  • Site security, such as the service door being opened.

Remote generator monitoring adds control on top of this: starting and stopping the genset, resetting faults and changing modes from the dashboard.

Remote Generator Monitoring with ASTSPARC

Typically conditions can be harsh, very often expensive to send maintenance engineers and where there can be little or no terrestrial land-based or cellular-based communications to remotely monitor and manage your asset.

A new non-intrusive generator telematics and SCADA type solution called AT Gensets using global satellite technology addresses all these challenges. With the massive expansion of low latency satellite networks, coupled with greatly reduced costs for low bandwidth mobile satellite data, has now significantly improved the economic viability of remotely managing and controlling generators worldwide using satellite technology for the marine, environmental and industrial sectors.

The Benefits of Remote Generator Monitoring

Blue and yellow Gensets next to a boat to illustrate remote monitoring for generators

Global: remotely using SCADA satellite technology. AT Gensets is a self-contained and independent global solution which communicates with gensets with MODBUS Controllers, worldwide.

Monitors: users can monitor a wide variety of operational, alarms, faults and fuel usage parameters to monitor the efficiency and health of the genset via an internet connection.

Controls: users can remotely start and stop under controlled conditions, reset, change mode, configure thresholds, download raw data and schedule reports.

Alerts: when an event is detected the user can choose to receive a notification by email.

User interface: users are supplied with an intuitive and simple to use AT Gensets web based Graphic User Interface (GUI) to enable them to manage, monitor, report and control the gensets.

Most importantly, marine assets are now never out of sight. Real time information is managed by accessible software to provide your organisation with increased levels of control and the ability to significantly reduce operating costs.

Generator Monitoring System Features

  • 32 configurable generator and engine operating parameters supported
  • Remote monitoring for generators' fault diagnosis, with over 60 named alarm conditions supported
  • Control register support and the ability to change generator mode under controlled conditions
  • Lower latency response compared to other satellite networks
  • Hourly reports as standard – other intervals available
  • Dual channel support for increased data reporting on GSM and for maximum cost effectiveness including disaster recovery & resilience
  • Automatic switch-over between GSM and satellite
  • Tamper alert – generator service door is monitored for open/close events
  • Configurable threshold reporting to ensure any alerts are recorded and transmitted at next message interval (email notifications)
  • Access to reporting portal
  • Graphical reporting on historical data
  • Facility to download raw data
  • Ability to schedule automatic reporting on parameter

Control Your Generators Remotely

Controls: users can remotely start and stop under controlled conditions, reset, change mode, configure thresholds, download raw data and schedule reports.

Alerts: when an event is detected the user can choose to receive a notification by e-mail.

Intelligent Generator Alerts

Fuel status: visual, colour-coded overlay of genset fuel status.

Wide range of engine parameters which are constantly monitored.

Genset access door sensor recording and alerting.

Monitor Your Generators Remotely

Monitors: iRAMS users can monitor a wide variety of operational, alarms, faults and fuel usage parameters to monitor the efficiency and health of the genset via a PC/smartphone with an internet connection.

Alerts: when an event is detected, the user can choose to receive a notification by e-mail.

User interface: users are supplied with an intuitive and simple to use iRAMS web-based Graphic User Interface (GUI) to enable them to manage, monitor, report and control the genset.

Mapping: aid in scheduling and refuelling logistics.

Fuel status: visual, colour-coded overlay of genset fuel status.

Frequently asked questions

What is a generator monitoring system?

A generator monitoring system collects data from a generator’s controller, such as fuel, load, alarms and running hours, and makes it available remotely through a web dashboard, with alerts when something needs attention.

Can a generator monitoring system work without mobile signal?

Yes. ASTSPARC uses satellite communications, so it works in remote and offshore locations with no mobile coverage, and it can switch automatically between GSM and satellite where both are available.

Do I need to replace my generator controller?

No. ASTSPARC is a non-intrusive system that communicates with gensets through their existing MODBUS controllers.

For more information, contact us today.

Visit AST Reygar to learn about how they can help you reduce emissions and save money. BareFLEET is AST Reygar’s award-winning remote monitoring and asset management system for maritime vessels.

We are pioneers in developing cutting-edge remote monitoring and asset management systems specifically designed for marine applications. Our award-winning solutions empower you with accurate, real-time insights, ensuring optimal performance, safety, and efficiency for your assets as they navigate the high seas.

Ask an expert

Have a question? Ask our team

Whether you are looking at fuel monitoring, maintenance, vessel performance or remote asset monitoring, our team will give you a straight answer. We usually reply within one working day.

Ask an Expert (blog posts)

We will only use your details to answer your question. See our privacy policy.

Subscribe to our newsletter:

Sign up to our newsletter
GDPR Consent

Contact us:

T: +44 (0) 1453 368 008
E: info@ast-reygar.com

Follow us on social media:

© 2025 AST Reygar Registered in England | Company Number: 8028047 England  | VAT Number: GB 224 0384 41
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram